Brakes Master Cylinders Fluids
Brake Caliper Supplies
AP Racing "Seal in bore" individual
replacement high-temperature seals
| Size | AP number | Racing Stuff No. |
| 1.375 " | CP4900-166 | 2E1593 |
| 1.50 " | CP4900-164 | 2E1277 |
| 1.625 " | CP4900-163 | 2E1278 |
| 1.75 " | CP4900-162 | 2E1279 |
| 2.00 " | CP2383-14 | 2E2209 |
| 36mm | CP3395-181 | 2E1280 |
If you are splitting an AP caliper with an internal fluid cross-over, you will then need to order part # 2E0915 for each cross-over seal needed.
Don't Forget !
Brake Assembly Grease
- Designed for use when assembling master cylinders, slave cylinders, prop valve, Hydraulic release bearings and calipers
- Prevents scuffing of seals and makes assembly easier
- Compatible with all racing brake fluids
Part #2E2414, 17.5ml tube container
Brake Caliper Pistons
If the brake caliper piston shows signs of scoring or a heavy wear pattern, then
their replacement along with new seals is required.
To order pistons, measure thes Outside Diameter and Length, remember to specify material (steel
or alloy) needed. For some restricted racing classes, you may not be allowed to exchange
a steel version with an alloy. Check your rules first!
Also, some vintage pistons may need to be special ordered, so please allow sufficient
time
to order.
Contact us for other AP seals, "seal on piston" type
seals or
Service kits for Girling 12SP, 14LF, AR calipers
